-
Dropout Fuse Cutout2
-
Dropout Fuse Cutout
-
ZX Vacuum Auto Recloser15.5kV,27kV and 38kV
-
Composite insulator
A composite insulator, also known as a non-ceramic or polymer insulator, is a key component used in high-voltage electrical power systems. Its primary purpose is to electrically isolate and mechanically support transmission and distribution lines, as well as substation equipment. Unlike traditional porcelain or glass insulators, composite insulators are constructed from a combination of polymer materials, offering a superior strength-to-weight ratio and enhanced performance in contaminated conditions.
-
Combi cutout
The Combi cut-out is a transformer protecon isolater thatcombinesboth a drop out surge arrester andfuse carrier expulsion link into one.Surge arrester The surge arrester housed in the Combi unit, will protect both the fuse and transformer from overvoltages in the event of a surge arrester failure the Combi unit will isolate that particular phase of the transformer , thereby eliminating further over-voltage to that phase of transformer. This provides a fail to safe system to protect the transformer.Fuse carrier The fuse carrier will operate as to isolate an overloaded or faulty transformer. The subsequent phase is isolated when the current drawn through the fuse element exceeds the rating thereof.
-
Radial feed pad mounted transformer
Radial feed pad mounted transformer
-
loop feed pad mounted transformer
A loop-feed transformer has two separate fully rated connection points per phase. This allows the parallel connection of two or more transformers on one circuit.
-
Single phase pad mounted transformer
The single-phase pad-mounted transformer rated capacity is 15-250 kVA. Single-phase Pad-mounted Transformer is generally used in places where single-phase power is required for civil use, such as household appliances, etc., and its capacity is relatively smaller than a three-phase pad-mounted transformer.
+86 139 6879 9444

