-
outdoor RMU series
-
switchgear/GIS/RMU/SF6
-
SM6 schneider series
The SM6 switchgear is designed for indoor installation, with actual dimensions of:Width: 375 – 750mmHeight: 1600 – 2050mmDepth: 840mm (floor-standing dimensions)It is suitable for installation in distribution rooms or compact substations, with cable connection from the front side.All control functions are centralized on the front operating panel, simplifying operation. The switchgear can be equipped with accessories such as relays, coils, and instrument transformers.
-
LV Pole Mounted Breaker
Users can connect the transformer's low-voltage side or other four-phase(3P+N)power sources as the incoming power supply for this circuit breaker.Additionally,its unique design eliminates the needfor users to crimp lugs before connection(as shown on figure
-
Sz10 Series On Load Power Transformer
SZ10 series 1lkV class On-load voltage regulation is a voltage regulation method by which a transformer canchange the voltage by changing the tap gear when operating under load. Power electronic component switches havethe advantages of frequent switching, no spark and long service life, so they can be used as on-load tap-changer for distribution transformers.
-
Sz10 Series 33kv Class Oltc Power Transformer
SZ10 series 33KV class On-load voltage regulation is a voltage regulation method by which a transtormer canchange the voltage by changing the tap gear when operating under load. Power electronic component switches havethe advantages of frequent switching, no spark and long service life, so they can be used as on-load tap-changer for distribution transformers.
-
Scb10 Series 33kv Class Dry Type Transformer
33kV class Dry-type transformers are widely used in local lighting, high-rise buildings, airports, wharf CNC machineryand other places Simply speaking, dry-type transformers refer to transfomers in which iron cores and windings are notimmersed in insulating oil Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). Duringnatural air cooling, the transformer can operate continuously for a long time at rated capacity. When forced air coolingoccurs, the output capacity of the transtormer can be increased by 50%. Suitable for intermittent overload operation oremergency overload operation; Since the load loss and impedance voltage increase greatly during overload and are in non-economic operation, it should not be kept in continuous overload operation for a long time.
-
Scb10 Series 11kv Class Dry Type Transformer
Dry-type transfomers are widely used in local lighting, high-rise buildings, airports, wharf CNC machinery and otherplaces. Simply speaking. dry-type transformers refer to transformers in which iron cores and windines are not immersedin insulating oil Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). During natural aircooling, the transtormer can operate continuously for a long time at rated capacity. When forced air cooling occurs, theoutput capacity of the transformer can be increased by 50% Suitable for intermittent overoad operation or emergencyoverload operation; Since the load loss and impedance voltage increase greatly during overload and are in non -economic operation, it should not be kept in continuous overload operation for a long time.
wzebl@wzebl.com
+86 139 6879 9444
+86（0)577-27885177
+86（0)577-27885155
No.555 Chezhan Road, Liushi Town, Yueqing, Wenzhou, Zhejiang Province, China 325604
